Miniature switch with sealed actuator and wire leads. IP67 sealing makes the VW1 series suitable for demanding applications where liquid ingress or exposure to other contaminants is possible. Lever actuators can be mounted in one of two positions based on design parameters and preferred operating characteristics. Supplied as standard with 300 mm UL wire leads or Q.C. terminals. Certified according to both ENEC and UL standards, so suitable for worldwide use.
- Miniature switch with IP67 protection
- Wide variety of electrical ratings from 0.1A to 10A 125/250V AC
- Wide variety of standard lever actuators
- Actuators can also be retrofitted
- Supplied with wire leads or Q.C. terminals
- Operating temperature range up to -40 to 85 °C
- Mechanical service life min. 1 million operations
- ENEC and UL certified
Note: The IP67 classification applies to pre-wired variants only. Although the actuator is IP67 sealed, variants with exposed terminals are classified IP00.
The table below lists a small selection of the available standard options. If you cannot find what you are looking for please contact us.
- Standard Parts
- Specifications
|
Part Number
|
Electrical Rating
|
Configuration
|
Operating Force (max.)
|
Terminal Type
|
Actuator Type (mounting position)
|
Actuator Length
|
Datasheet
|
|---|---|---|---|---|---|---|---|
| VW1-03S0-00D3-Z | 3A 125/250V AC | S.P.D.T. | 200 gf | Q.C. 4.7 x 0.5 mm | Button | ||
| VW1-03S1-04D3-Z | 3A 125/250V AC | S.P.D.T. | 125 gf | Q.C. 4.7 x 0.5 mm | Straight lever (front) | 28.95 mm | |
| VW1-03S1-06D5-Z | 3A 125/250V AC | S.P.S:T. -N.C. | 130 gf | Q.C. 4.7 x 0.5 mm | Roller lever (front) | 26.16 mm | |
| VW1-06D2-02D3-Z | 6A 125/250V AC | S.P.D.T. | 20 gf | Q.C. 4.7 x 0.5 mm | Straight lever (rear) | 31.96 mm | |
| VW1-06S0-00D3-Z | 6A 125/250V AC | S.P.D.T. | 200gf | Q.C. 4.7 x 0.5 mm | Button | ||
| VW1-06S1-01A0-DB001-Z | 6A 125/250V AC | S.P.D.T. | 160 gf | Wire leads 18 AWG | Straight lever | 20.66 mm (front) | |
| VW1-06S1-02A0-DB001-Z | 6A 125/250V AC | S.P.D.T. | 110 gf | Wire leads 18 AWG | Straight lever (front) | 31.96 mm | |
| VW1-06S1-02D3-Z | 6A 125/250V AC | S.P.D.T. | 110 gf | Q.C. 4.7 x 0.5 mm | Straight lever (front) | 31.96 mm | |
| VW1-06S1-03A0-DB001-Z | 6A 125/250V AC | S.P.D.T. | 70 gf | Wire leads 18 AWG | Straight lever (front) | 55.76 mm | |
| VW1-06S1-04D3-Z | 6A 125/250V AC | S.P.D.T. | 125 gf | Q.C. 4.7 x 0.5 mm | Sim. roller lever (front) | 28.95 mm | |
| VW1-06S1-05A0-CB001-Z | 6A 125/250V AC | S.P.D.T. | 200 gf | Wire leads 16 AWG | Roller lever (front) | 16.46 mm | |
| VW1-06S1-05A0-DB001-Z | 6A 125/250V AC | S.P.D.T. | 200 gf | Wire leads 18 AWG | Roller lever (front) | 16.46 mm | |
| VW1-06S1-05D3-Z | 6A 125/250V AC | S.P.D.T. | 200 gf | Q.C. 4.7 x 0.5 mm | Roller lever (front) | 16.46 mm | |
| VW1-06S1-06A0-CB001-Z | 6A 125/250V AC | S.P.D.T. | 130 gf | Wire leads 16 AWG | Roller lever (front) | 26.16 mm | |
| VW1-10S0-00A2-CB001-Z | 10A 125/250V AC | S.P.S.T. -N.C. | 200 gf | Wire leads 16 AWG | Button | ||
| VW1-10S0-00D4-Z | 10A 125/250V AC | S.P.S.T. -N.O. | 200 gf | Q.C. 4.7 x 0.5 mm | Button | ||
| VW1-10S1-01D3-Z | 10A 125/250V AC | S.P.D.T. | 160 gf | Q.C. 4.7 x 0.5 mm | Straight lever (front) | 20.66 mm | |
| VW1-10S1-02A0-CB001-Z | 10A 125/250V AC | S.P.D.T. | 110 gf | Wire leads 16 AWG | Straight lever (front) | 31.96 mm | |
| VW1-10S1-02D3-Z | 10A 125/250V AC | S.P.D.T. | 110 gf | Q.C. 4.7 x 0.5 mm | Straight lever (front) | 31.96 mm | |
| VW1-10S1-03A0-CB001-Z | 10A 125/250V AC | S.P.D.T. | 70 gf | Wire leads 16 AWG | Straight lever (front) | 55.76 mm | |
| VW1-10S1-03D3-Z | 10A 125/250V AC | S.P.D.T. | 70 gf | Q.C. 4.7 x 0.5 mm | Straight lever (front) | 55.76 mm | |
| VW1-10S1-04A0-CB001-Z | 10A 125/250V AC | S.P.D.T. | 125 gf | Wire leads 16 AWG | Sim. roller lever (front) | 28.95 mm | |
| VW1-10S1-04D5-Z | 10A 125/250V AC | S.P.S.T. -N.C. | 125 gf | Q.C. 4.7 x 0.5 mm | Sim. roller lever (front) | 28.95 mm | |
| VW1-10S1-05A0-CB001-Z | 10A 125/250V AC | S.P.D.T. | 200 gf | Wire leads 16 AWG | Roller lever (front) | 16.46 mm | |
| VW1-10S1-05D3-Z | 10A 125/250V AC | S.P.D.T. | 200 gf | Q.C. 4.7 x 0.5 mm | Roller lever | 16.46 mm | |
| VW1-10S1-06A0-CB001-Z | 10A 125/250V AC | S.P.D.T. | 130 gf | Wire leads 16 AWG | Roller lever (front) | 26.16 mm | |
| VW1-10S1-06D3-Z | 10A 125/250V AC | S.P.D.T. | 130 gf | Q.C. 4.7 x 0.5 mm | Roller lever (front) | 26.16 mm | |
| VW1-10S2-02A0-CB001-Z | 10A 125/250V AC | S.P.D.T. | 75 gf | Wire leads 16 AWG | Straight lever (rear) | 31.96 mm | |
| VW1-P1S0-00A0-DB001-Z | 0.1A 125/250V AC | S.P.D.T. | 200 gf | Wire leads 18 AWG | Button | ||
| VW1-P1S0-00D3-Z | 0.1A 125/250V AC | S.P.D.T. | 200 gf | Q.C. 4.7 x 0.5 mm | Button |
|
Characteristic
|
VW1 series
|
|---|---|
| Electrical Rating | 0.1A - 10A 125/250V AC |
| Circuitry | S.P.D.T., S.P.S.T. -N.O., S.P.S.T. -N.C. |
| Ingress Protection | IP67 (IP00 with bare terminals) |
| Termination | Quick Connect (Q.C.)., wire leads |
| Agency Approvals | ENEC, UL |
| Operating Force | 50 gf - 300 gf with button actuator, model dependent |
| Operating Temperature | -40 to 85 °C |
| Electrical Service Life | min. 10000 operations |
| Mechanical Service Life | min. 1000000 operations |
| Contact Resistance (initial) | min. 300 mOhm |
| Insulation Resistance (initial) | min. 100 MOhm (500V DC for one minute) |
| Housing Material | PBT |
| Button Material | PBT |
| Terminal Material | Brass |
Specifications subject to change without notice.