Find what you are looking for..
Product Type
Product Category

VW
The VW series is IEC 320 Sheet J AC or DC outlet rated up to 20A 250VAC. The VW series is snap-in mounting with a choice of Quick-Connect, solder, or PCB terminals and available in black or white housing.
Rated: 20A 250VAC (ENEC), 20A 250VAC, 20A 60VDC (UL)
Electric strength: 2,000VAC for 1 minute
Insulation resistance: 100MΩ min at 500VDC

KWI
The KWI series is a high rated IEC 60320 C20 AC or DC Inlet; 20A 250V AC. The KWI is a standard industry cut-out, snap-in mounting with a choice of either Quick-Connect or solder terminals and available in black or white.
Rated: 20A 250VAC (ENEC), 20A 250VAC, 20A 60VDC (UL)
Cut-out: 32.5 x 24.3 mm
Electric strength: 2,000VAC for 1 minute

KS
The KS series is an IEC 320 C14 inlet, also known as an appliance inlet or power inlet. Screw flange or snap-in fit with a choice of solder or Quick Connect terminals. Metal housing for grounding available.
Rated: 15A 250VAC (UL), 10A 250VAC (VDE, ENEC)
Insulation resistance: 100MΩ min at 500VDC
Dielectric strength: 2,000VAC for 1 minute

KC
The KC series is a C6 inlet is ideally suited to applications where panel space is limited. The KC series has a rating of 2.5A 250VAC and is certified according to UL and ENEC standards. The KC series is available as PCB mounting or Snap-In.
Rated: 2.5A 250VAC (UL, ENEC)
Housing: PBT or Nylon66 (UL94V-2)
Temperature range: -20°C to +100°C

NMEA 2000® IP67/IP68
Enabling communication between devices on a boat or vessel
Industry-standard M12 sizing with gold-plated 5-pin or 8-pin OneNet connections featuring X-coding
IP67 and IP68-rated housings in UL-approved thermoplastic or nickel-plated metal alloys
Comprehensive range of configurations including panel mount, cable mount, adaptors, pre-cabled, inline, and field-installable options

IP Rated Light Electric Vehicle & eBike
A range of compact connectors rated up to IP67 for a number of eBike / LEV applications designed to withstand the rigours of outdoor use and protect against dust, moisture and vibration. The range is suited to a variety of application specific uses including; battery connection, battery charging, motor control, display, sensing and powering on board accessories (e.g. USB charging). With various pin configurations and hybrid power connectors supplying up to 20 amps per pin, these are well suited to everything from signal to battery discharging. The products are all designed for quick fool proof connection and cable ends can be overmolded according to customer specifications for each application.
IP Rating: IP65 / IP66 / IP67
Pins: 2 - 11
Current rating: 1A to 20A

Waterproof Cable Glands
IP68 rated Nylon Cable glands for waterproof sealing of cables in harsh environments and outdoor applications such as outdoor lighting, industrial controls and electrical panel installations. Moulded in black or grey nylon with a variety of thread sizes, with multi hole inserts and blanking plugs available for differing cabling installation applications.
IP68 protection
Sizes: M12 to M100 / PG7 to PG63
Cable OD: 3mm to 80mm

Hybrid
The Hybrid series combines power supply and data transmission in one single reliable and robust connector. This technology reduces the time and cost of multiple installations allowing for a high level of flexibility. Available in four cut-outs; 16mm, 20.7mm, 25.5mm and 29.4mm.
Lightweight thermoplastic housings
IP67 ingress protection in mated or unmated form
Panel mount and over moulded with bayonet-type or twist & lock locking mechanisms